Models And Contents Of The Package; Product Description - Dea 224RR Instrucciones De Uso Y Advertencias

Operating instructions and warnings
WARNING To ensure an appropriate level of electrical safety always keep the 230 V power supply
cables apart from low voltage cables (motors power supply, controls, electric locks, aerial and auxiliary
circuits power supply), and fasten the latter with appropriate clamps near the terminal boards.
WARNING Any installation, maintenance or repair operation on the whole system must be carried
out exclusively by qualified personnel. All these operations must be performed only after disconnecting
the power supply, and operating in strict compliance with the electrical standards and regulations in
force in the nation of installation.
WARNING Install the control board according to the instructions given in "F3 Installation". Drill
only the holes foreseen by the manufacturer to allow for wires passage, and use the specified clamps.
Failure to comply with these instructions may jeopardize the level of electrical safety.
WARNING During the motors stroke memorization, the control board detects automatically the
presence and type of photocells, safety devices and limit switches which are installed. It is therefore
essential that during this phase the latter be properly connected and working. In case only one motor
works, P29=1 must be programmed immediately.
W ARNING W rong a ssessment o f i mpact f orces m ay c ause s erious d amage t o p eople, a nimal a nd t hings.
DEA S ystem r eminds a ll p ersonnel t hat t he i nstaller m ust a scertain t hat t hese i mpact f orces, m easured a ccording
to EN 12445 prescriptions, are actually below the limits indicated by EN12453 regulation.
WARNING Any external safety device installed in order to conform to the limits set for impact forces
must comply with EN12978.
WARNING Using spare parts not indicated by DEA System and/or incorrect re-assembly may en-
danger people, animals and property, and may also cause malfunctioning of the product: always use
parts provided by DEA System and follow assembly instructions.
WARNING Disposal of packaging materials (such as plastic, card board, etc.) must be done according to
regulations in force locally. Do not leave plastic bags and polystyrene within the reach of children
WARNING Dumping batteries in the ordinary litterbin or leaving them just anywhere is extremely
dangerous for the environment. Always use the differentiated waste disposal bins and comply with local
regulations in force.

3 MODELS AND CONTENTS OF THE PACKAGE

The control board 224RR is available also in the 224RR/B model complete with backup batteries in
case of power failure.

4 PRODUCT DESCRIPTION

224RR control board has been designed for the automation of swing gates operated by 24 V
motors. It is extremely versatile, easy to install and fully complies with European regulations concerning
electromagnetic compatibility and electric safety
Main features of the product:
14
1. setting all parameters by 3 keys and a 4-digit display;
2. possibility of fine tuning of motor speed both during its complete stroke and during the last phase of it
(slow-down). It keeps motor torque even at very low speed;
3. possibility to set at will the slow-down duration of each of the two motors separately;
4. Internal anti-crash safety device whose sensitivity can be adjusted (according to a 70-level scale) se-
parately for the two motors and in both operating directions;
5. inputs to connect both normal and powered external safety devices (mechanical ribs or photo-
cell barriers), with the possibility to run a self-test before each operation. Controlled photocells;
6. built-in 433,92MHz radio receiver for both HCS and HT12E coding offering the possibility to search
and delete each transmitter separately.
A4
A5
A6
A7
A 8
A9
A10
A 1 1
A12