Packet Data; Modem Settings; Call Settings - Nokia 2660 Manual Del Usuario

S e t t i n g s

Packet data

General packet radio service (GPRS) or 3G are network services that allow mobile
devices to send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity > Packet
data > Packet data connection and from the following:
When needed — Set the packet data connection to be established when an
application needs it. The connection is closed when the application is terminated.
Always online — Set the device to automatically connect to a packet data network
when you switch the device on.

Modem settings

You can connect the device using Bluetooth wireless technology to a compatible
PC and use the device as a modem to enable GPRS 0r 3G connectivity from the PC.
To define the settings for connections from your PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access point, and
activate the access point you want to use. Select Edit active access point > Packet
data access point, enter a name to change the access point settings, and select OK.
Select Packet data access point, enter the access point name (APN) to establish a
connection to a network, and select OK.

■ Call settings

Select Menu > Settings > Call settings settings and from the following:
Call forwarding — Forward your incoming calls (network service). You may not be
able to forward your calls if some call restriction functions are active. See Call
restrictions in "Security" on page 41.
Anykey answer — Answer an incoming call by briefly pressing any key, except the
power key, the camera key, or the left and right selection keys
38