Mounting - eTIGER ES-D5B Manual Del Usuario

EN

Mounting

Make sure you have read carefully the instructions for optimal and
unsuitable installations before mounting the detector .
Select a suitable location (generally speaking, place the detector
at the center of the ceiling of the detection area) and screw the
mounting bracket to the selected location (see drawing below) .
The detector is a small device that shall not be opened .
Insert the battery in its compartment and turn the plastic cover
clockwise . Press the test button and make sure the detector can
work properly .
Care
It is recommended to open the cover and remove the dust in the
detector's smoke chamber at least once a year .
Remove the battery before cleaning the detector . Remove the dust
with a vacuum cleaner (attached to a soft brush) . Carefully remove
dust in the detector components, especially in the openings of the
smoke chamber . Hand-wash the cover with a cloth dampened with
clean water and dry it with a lint-free cloth . Do not let any water in
the detector components .
Once your detector is clean, replace the battery, and close the cover .
Test the detector after cleaning .
7