Radio Interference - IKEA TILLREDA Manual De Instrucciones

ENGLISH
CLEANING
Be sure to unplug the appliance
from the power supply.
1. Clean the cavity of the oven
after using with a slightly
damp cloth.
2. Clean the accessories in the
usual way in soapy water.
3. The door frame and seal and
neighbouring parts must be
cleaned carefully with a damp
cloth when they are dirty.
4. Do not use harsh abrasive
cleaners or sharp metal
scrapers to clean the oven
door glass since they can
scratch the surface, which
may result in shattering of the
glass.
5. Cleaning Tip  For easier
cleaning of the cavity walls
that the food cooked can
touch: Place half a lemon in
a bowl, add 300ml (1/2 pint)
water and heat on 100%
microwave power for 10
minutes. Wipe the oven clean
using a soft, dry cloth.
12
UTENSILS
CAUTION
Personal Injury Hazard
It is hazardous for anyone other than a competent
person to carry out any service or repair operation that
involves the removal of a cover which gives protection
against exposure to microwave energy.
See the instructions on "MATERIALS YOU CAN USE IN
MICROWAVE OVEN OR TO BE AVOIDED IN MICROWAVE
OVEN."
There may be certain non-metallic utensils that are not
safe to use for microwaving. If in doubt, you can test the
utensil in question following the procedure below.
Utensil Test:
1. Fill a microwave-safe container with 1 cup of cold
water (250ml) along with the utensil in question.
2. Cook on maximum power for 1 minute.
3. Carefully feel the utensil. If the empty utensil is warm,
do not use it for microwave cooking.
4. Do not exceed 1 minute cooking time.

RADIO INTERFERENCE

1. Operation of the microwave
oven may cause interference
to your radio, TV or similar
equipment.
2. When there is interference, it
may be reduced or eliminated
by taking the following
measures:
1) Clean door and sealing
surface of the oven.
2) Reorient the receiving
antenna of radio or
television.
3) Relocate the microwave
oven with respect to the
receiver.
4) Move the microwave oven
away from the receiver.
5) Plug the microwave oven
into a different outlet so
that microwave oven and
receiver are on different
branch circuits.