To eliminate the ALARM, press OK and then ESC (only if the values have returned within the non-alarm range). If the
values are still within the alarm threshold, to enter the MENU, press OK (the instrument goes in PAUSE) and then press ESC
for about 5 sec.
Overdosage alarm
An alarm could be triggered if the set-point values are not reached after
a certain amount of time set by the user. By default, this alarm triggers with
a time of 10 minutes. The relay output REL5 is always enabled
The following are the steps for setting the operating parameters of the
function.
ENGLISH
60
The same procedure must be repeated on measurement 2 (P2) – Redox