Publicidad
Idiomas disponibles
Idiomas disponibles
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 6
Using your floor scrubber & polisher with
Vac on various floor types
DO NOT USE ON CARPET
Take care not to fall or slip when polishing floors,
they can become very
Only use dedicated floor products; other
inappropriate polishes and waxes may leave
the floor dangerously slippery.
Before using your machine ensure the floor is clear
from debris/dirt as large particles can get stuck in
the the brushes & pads and may scratch your floor.
Spreading floor treatments
• Always read and follow manufacturer's
instructions for floor treatment products.
• Apply the treatment directly to the floor unless
instructions indicate otherwise.
The recommended polish is Ewbank Gloss
Floor Polish (FP555) of which a sample is
supplied and available from Ewbank stockists.
Scrubbing /Cleaning the floor
• Ensure that the scrubbing brushes are
attached to the product (see page 5).
• To turn the machine on, select setting II
(scrubbing and vacuuming).
• With your foot securing the head on the floor,
pull the handle towards you and the machine
will start (Fig.8).
• Move the machine slowly across the surface
of the floor to loosen and collect any debris.
• Take care not to scratch the floor if hard dirt gets
stuck in the brush heads.
• If during this process the dust container
becomes full of debris, please empty as
described below.
• Once this is complete, turn the machine off
before returning it to its upright position.
slippery
in the process.
Removing old polish
• Read and follow carefully the instructions for
your chosen floor polish remover.
• Use the white pads to scrub old polish from
the floor.
Switch to position II
Switch to position I
Fig.8
6
Publicidad
