Brandson Equipment 304561 Manual De Usuario página 21

• The appliance is ready and can now be used to vacuum, for e.g. ash.
• Move the aluminium pipe closely, slowly and evenly over the dirt. Always
make sure that the product is upright.
5. Initial use (Blower mode)
In addition to the vacuuming mode, the Brandson ash vacuum cleaner provides
the option to use the exhaust air through the so-called blower mode.
To do this, insert the end of the hose (7) with the locking tabs into the opening
(11) of the lid / motor unit (3).
The hose can be locked by slightly turning in the clockwise direction.
You can now blow dust, chips or ash from surfaces or equipment or fan the
embers on your grill by guiding the hose / aluminium pipe.
6. Disassembling the hose
To disassemble the hose, slightly rotate the end attached to the motor unit (3), in
the counterclockwise direction and remove it by pulling lightly.
7. Filter
The appliance has a HEPA filter (9) on the back of the motor unit (3).
Turn off the product and remove the lid from the container.
Rotate the lid so that you can see the filter. Now you can simply remove the filter.
Note: The filter protection bag is used to keep the filter clean. The filter protec-
tion bag is used to cover the filter.
English
21