Placing Specifications; Package Contents - Stanley PB2500 Manual De Instrucciones

E N G L I S H
2.2

PLACING SPECIFICATIONS

Rivet Type
OPEN END
CLOSED END
AVEX®/
STAVEX®
AVINOX®/
AVIBULB®
HR/HT
INTERLOCK®
HEMLOK®
KLAMP-TITE®/ KTR
BULBEX®/LS/TL
MONOBOLT®
MULTI-GRIP
PULL-THRU (PT)
Q RIVET
T-LOK®
T Rivet
AVSEAL®II
Note: For details on the nose equipment please refer to the accessories manual.
This tool has the capability to verify measurements. STANLEY Engineered Fastening does not assure the value and
accuracy of Break‐load and Stroke displayed. In addition, STANLEY Engineered Fastening cannot provide the range
of Break‐load and Stroke for each rivet. The limits must be set by the tool operator as a means to prevent the release
of defective products, abnormal fastening or to detect abnormalities of the tool. Examples of tool abnormalities
include jaw slip or the requirement to return the tool for maintenance.
Rivets with a low breaking load (less than 3,000N such as an Aluminum rivet 4.0mm size etc.) may not show the
rivet curve correctly. If the rivet curve and assessment are not required or the rivet curve does not show correctly,
only the counter function can be used.
Rivets with extremely low load (less than 2,000N such as Aluminum rivet 3.2mm etc) the counter display will not
function correctly.
2.3

PACKAGE CONTENTS

This package contains:
PB2500S-######
Battery Pack
Charger
SA Nosepiece, 4
SA Nosepiece, 5
Jaw Pusher Assembly, 4
Jaw Pusher Assembly, 5
Instruction Manual
*The quantity and type of Li-Ion Battery Packs depends on Model Number and region sold. Contact your local
reseller for details and options.
12
2.4mm
3.0mm
[3/32"]
● ●
●
●
PLACING CAPACITY
PB2500 Smart
3.2mm 4.0mm
[1/8"] [5/32"]
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
●
Qty
**
**
1pc
1pc
1pc
1pc
1pc
4.8mm
4.3mm
[3/16"]
●
●
●
●
●
●
●
●
●
●
●
●
●
5.0/6.0/
7.0mm
●