J5create JUA 310 Manual Del Usuario página 21

USB DISPLAY ADAPTER
A. Connect all external display devices (monitor/ projector) to the
VGA/DVI connector of USB 3.0 Display Adapters and switch power
on.
B. Connect the USB 3.0 Display Adapter into available USB port of PC
or Notebook.
After Inserting an USB 3.0 Display Adapter into a USB port, the systems
will automatically start the installation procedure and the prompt
message will pop-up on the task bar.
The Device driver software was installed properly, if you are going to install
more USB 3.0 Display Adapters, repeat step A & B or restart computer
The functions of the USB 3.0 Display Adapter will be activated after the
computer restarted. You might see the mirror display shown on the display
device.
21
USER MANUAL