ENGLISH
FUNCTIONS
IMPORTANT: You can connect analog AND DMX strobes to this device. When you connect analog
strobes, the dimmer slider (n°7) will have no effect. When you connect 2 channel DMX strobes, the
dimmer slider (n°7) will have effect when the selected DMX strobe has a dimmer function.
Channel 1: speed rate
Channel 2: dimmer 0 100 %
If you use 2 channel DMX strobes, you have to set the DMX addresses of the strobes first
For DMX strobes where the addresses have to be set by DIP-switches,
check
the table and the examples below:
Examples:
Channel 1 : dip / on : #1 ( 1 )
Channel 3 : dip / on : #1, #2 ( 1 + 2 = 3)
Channel 5 : dip / on : #1, #3 ( 1 + 4 = 5 )
Channel 7 : dip / on : #1, #2, #3 ( 1 + 2 + 4 = 7 )
1. BLACKOUT BUTTON: This button is used to blackout the attached strobes.
2. FULL ON BUTTON: All strobes will light at high speed rate and full output power.
3. SINGLE FLASH BUTTON: When the unit is set in blackout, you can tap this button to flash all strobes 1
time.
4. CHASE BUTTONS: Press the up/down button to choose one of the 10 built-in patterns.
Pattern 0
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5
Pattern 6
Pattern 7
Pattern 8
Pattern 9
5. MODE BUTTON: While pressing this button, you can choose between 2 working modes:
Green LED is lit: You are working in SOUND MODE. The strobes will react to the music.
(internal micro)
Yellow LED is lit: You are working in AUTO MODE. You can choose one of the chases by using the
chase button (see n° 4).
6. SPEED SLIDER: With this slider, you can choose the flash rate of the strobes.
7. DIMMER SLIDER: Does not work on analog strobes. Works on DMX strobes when they have a dimmer
function. You can set the output power from 0% to 100%
BRITEQ
®
(FRONT)
Random pattern
1234 Full on
1-2-3-4 ― 4-3-2-1
1-2-3-4-3-2-1
12-34 ― 24-13 ― 23-14
1-12-123-1234-123-12-1-stop ―4-43-432-4321-432-43-4-stop
1-12-123-1234-234-34-4-stop―4-43-432-4321-321-21-1-stop
1-3-2-4-3-1-4-2
12-23-34-41 ― 43-32-21-14
1 2-1 2 3-1 2-1 2 3 4
3/24
OPERATION MANUAL
BT-STR4