Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Move the load by pulling the hand chain or by pushing the load.
Do not stand under a raised load.
Media / Recommended lubricants
Recommended lubricant for greasing points:
- Meshing, drive pinion
Multi-purpose grease DIN 51825 T1 K2K
After use the lubricant must be disposed of in compliance with the statutory regulations.
Inspection and servicing instructions
Safety instructions
Remove all the strain from the girder trolley by suitable means before carrying out inspection and servicing work
Inspection intervals
Conduct an expert inspection
before commissioning
Daily
Quarterly
Every six months
Every year
The service life of the unit is limited, worn parts must be replaced promptly by an expert.
Contact your dealer for spare parts in general.
Problem
The girder trolley can only be
moves with difficulty.
Instruction Grey Label
To change your new POWERTEX Trolley to Black Line:
If the product should be used in dark environments, add the grey label on the product's nameplate like this.
The data on the nameplate should ALWAYS be visible, and must NOT be covered.
End of use/Disposal:
After the trolleys have been taken out of use, the parts of the block and tackle
are to be recycled or disposed of in compliance with the statutory regulations.
Disclaimer
We reserve the right to modify product design, materials, specifications or instructions without prior notice and without obligation to others.
If the product is modified in any way, or if it is combined with a non-compatible product/component, we take no responsibility for the consequenc-
es in regard to the safety of the product.
Declaration of conformity
SCM Citra OY
Asessorinkatu 3-7
FI-20780 Kaarina
Finland
www.powertex-products.com
hereby declares that the POWERTEX product as described above is in compliance with EC Machinery Directive 2006/42/EC & EN 13157.
Eye connection/direct connection
The eye connection can be rotated 90° to allow direct connection between hoist and trolley, without
use of hook/eye. Such direct connection must only be made by authorized distributor.
Servicing and inspection work
Visual inspection of rollers (for signs of cracks and deformation)
Visual inspection of the chain
Function of the unit
Adjustment range, visual inspection of the track width lateral play
The rollers are fitted with ball bearings that are lubricated for life
Check the condition of the hand chain (remove sharp edges as they constitute an injury risk)
Check screw connections.
Grease the meshing on the rollers and drive pinion.
Check that the model plate is completely legible.
Have the annual test carried out by an expert
Cause
No grease in the bearings and meshing.
Dirt or other foreign bodies on load girder.
Girder deformed
Servicing and inspection work
Visuel inspection of rollers (for signs of cracks or deformation)
Visual inspection of the chain
Function of the unit
Adjustment range, visual inspection of the track width lateral play
5
Publicidad
