Function Settings; Audio Settings - Pioneer FH-X385UB Manual De Instrucciones

2
Turn the M.C. dial to select one of the categories below, then press to confirm.
• FUNCTION settings (page 8)
• AUDIO settings (page 8)
• SYSTEM settings (page 9)
• ILLUMINATION settings (page 9)
• MIXTRAX settings (page 10)
3
Turn the M.C. dial to select the options, then press to confirm.

FUNCTION settings

The menu items vary according to the source.
Menu Item
BSM
REGIONAL
[ON], [OFF]
LOCAL
FM: [OFF], [LV1], [LV2], [LV3], [LV4]
AM/SW: [OFF], [LV1], [LV2]
TA
[ON], [OFF]
AF
[ON], [OFF]
NEWS
[ON], [OFF]
8
En
Description
Store the six strongest stations on the number
buttons (1/ to 6/ ) automatically.
Limit the reception to the specific regional
programs when AF (alternative frequencies
search) is selected. (Available only when FM
band is selected.)
Restrict the tuning station according to the
signal strength.
Receive current traffic information if available.
(Available only when FM band is selected.)
Allow the unit to retune to a different frequency
providing the same station. (Available only when
FM band is selected.)
Interrupt the currently selected source with
news programs. (Available only when FM band is
selected.)
Menu Item
ALARM
[ON], [OFF]
SEEK
[MAN], [PCH]
S.RTRV
USB
[1] (effective for low compression
rates),
[2] (effective for high
compression rates),
[OFF]

AUDIO settings

Menu Item
FADER*1
BALANCE
EQ SETTING
[SUPER BASS], [POWERFUL],
[NATURAL], [VOCAL], [CUSTOM1],
[CUSTOM2], [FLAT]
Select an equalizer band and
level for further customizing.
Equalizer band: [80HZ], [250HZ],
[800HZ], [2.5KHZ], [8KHZ]
Equalizer level: [+6] to [–6]
LOUDNESS
[OFF], [LOW], [MID], [HI]
SUB.W*2
[NOR], [REV], [OFF]
Description
Interrupt the currently selected source with
emergency announcements. Select [OFF] to
disable this function.
Assign or buttons to seek the stations
one by one (manual tuning) or select a station
from the preset channels.
Enhance compressed audio and restore rich
sound.
Not available when:
• USB is selected as a source and the MIXTRAX
function is set to on.
• CD-DA/CD-TEXT is played back.
Description
Adjust the front and rear speaker balance.
Adjust the left and right speaker balance.
Select or customize the equalizer curve.
[CUSTOM1] can be set separately for each source.
However, each of the below combinations are set
to the same setting automatically.
[CUSTOM2] is a shared setting used for all
sources.
You can also switch the equalizer by pressing
repeatedly.
Compensate for clear sound at low volume.
Select the subwoofer phase.