Attaching/Removing The Brush Extension; Steam Brush Function - Silvercrest SDRB 1000 B1 Instrucciones De Uso

CAUTION
► Always remove the plug
socket before filling the appliance! There is a
risk of electric shock!
♦ Remove the water tank
release of the water tank
lift the water tank
by the protruding gripping aids with your thumb
and index finger and lift it up vertically. The tem-
perature control
is not removed along with the water tank.
♦ Open the filler opening
♦ Use the measuring cup
with water to the "Max" marking.
♦ Close the filler opening
Ensure that the collar in the filler opening
locks into the notch on the lid. This means that
the water tank is properly closed.
♦ Replace the water tank
The water tank must audibly click into the
release of the water tank
Attaching/removing the brush
extension
CAUTION
► Never remove or attach the brush extension
while the appliance is hot.
Risk of burns!
♦ To use the steam and brush functions, please at-
tach the brush extension
♦ To do this, push the brush extension
the appliance along the guide aid until it is fully
attached. The release of the brush extension
must click into place audibly.
♦ To use the ironing function, please remove the
brush extension
♦ To do this, push the release
pull the brush extension
SDRB 1000 B1
from the power
by sliding back the
until you can
up. Grip the water tank
stays on the appliance and
in the water tank
to fill the water tank
in the water tank
onto the appliance.
.
to the steam brush.
onto
from the steam brush.
downwards and
off the appliance.

Steam brush function

♦ Attach the brush extension
It must audibly click into the release of the brush
extension .
♦ Insert the plug
grounded wall socket.
♦ To produce steam, set the temperature control
lights up. As soon as the selected temperature
has been reached, the heat-up indicator lamp
goes out.
NOTE
.
► To use the steam burst function, set the tem-
perature control
Lower temperatures are insufficient for pro-
.
ducing a burst of steam.
♦ You can now produce a burst of steam by press-
ing the steam burst button
NOTE
► To produce the first burst of steam after heat-
ing the appliance, you may have to press the
steam burst button
The appliance is now ready for use.
CAUTION
► The steam brush can be used with any piece
of clothing. Be careful when treating heat-
sensitive textiles such as synthetics, polyamide
or artificial silk. Before treating such materials,
first process a small test patch in an invisible
spot (inside of the seam) to ensure that the hot
steam does not damage the material. Do not
apply the hot ironing sole
als directly. Only use the steam burst function.
to the appliance.
into a properly installed and
.
several times in a row.
to these materi-
GB │ IE
│
19 ■