Wall Mount Installation - Xtech XTS-810 Guia De Instalacion

Button
1. ON/OFF button
Press it to enable/disable the Standby mode.
2. BT button Press this button briefly to turn on the Bluetooth
and start pairing the soundbar.
The BT mode is the soundbar default mode so the unit will
automatically turn to BT once it is turn on.
Note: If another source, like USB flash drive or SD™
memory card is connected to the soundbar, the unit will
start playing audio from any of these sources.
3. Play/Pause
Press to start and pause media.
4. Mute
Cancels the audio coming from the soundbar. Press it
again to unmute the device.
5. Coaxial button
Use this button to activate the audio connection for a TV,
DVD player or receiver.
6. USB button Press this button briefly to play audio stored in a USB flash
drive.
7. SD™ card button
Press it briefly to play audio stored in a SD™ memory card.
8. Optical button Press this button briefly to switch to the optical digital
mode to play audio coming from a device connected to the
optical digital port.
9. V- button Press it to decrease the audio level coming from the
soundbar.
Description
function
®
10. V+ button
Press it to increase the audio level coming from the
soundbar.
11. Aux input button
Press this button briefly to select the source device
connected to the 3.5mm input jack
12. Previous track Press it to go back to the previous track on your play list.
This feature is only available in USB, BT and SD™ modes.
13. Next track Press it to select the next track on your play list.
This feature is only available in USB, BT and SD™ modes.
IV. Preliminary steps

Wall mount installation

1. The soundbar can be placed on a desktop or hang on the wall (horizontally or
vertically).
2. If you decide to mount the soundbar on the wall, determine the location and
mark the holes on the surface.
Wall mounting holes