Samsung SEK-2500U Manual página 14

Rolling the TV Back to Its Pre-Kit State
If you restore your TV to its Pre-Kit state, it will not be able to play programs recorded when the UHD Evolution Kit
✎
was connected to it.
1. Turn off the TV, and then disconnect the TV power plug.
2. Disconnect the UHD Evolution Kit and UHD Evolution Kit cable from the TV.
3. Connect the previously used One Connect and One Connect cable to the TV.
4. Reconnect the power plug.
5. Turn on the TV, navigate to Support > Software Update > Update now, and then update the software.
Update the software via the Internet. If you do not, later you will not be able to update via USB or play DRM-protected
✎
videos.
e-Manual Guide
The embedded e-manual contains information about your TV's key features. To view the e-manual, use one of the following
methods:
•
Select Support > e-Manual in the TV's menu.
•
On the Samsung Smart Control, press the
[SEK-2500U-SA]BN68-06255A-00L03.indb 14
button, and then select e-Manual on the On-Screen Remote.
KEYPAD
English-14
2014-04-17 4:59:10