Initial Start-Up - Termozeta 402003 Libro De Instrucciones

ENGLISH
ASSEMBLING/DISASSEMBLING OF THE APPLIANCE
Always make sure the plug is disconnected from the
power outlet before assembling or disassembling
the appliance.
To disassemble the appliance turn the blending
shaft (2) to the right and extract it from the motor
body (1) (fig. 1)
For the correct assembly, position the blending
shaft in the seat of the motor body making sure to
align the "open lock" symbol with the small triangle
(6) ( ) shown on the motor body (fig 2). Then
rotate the shaft to the left until it locks into place.
INSTRUCTIONS FOR USE
Before using the appliance, disassemble and wash the blending shaft with the blade (2).
Use normal dishwashing detergent since it comes into contact with food during use (refer
to the section on "cleaning").

INITIAL START-UP

• Completely unwind the power cord (5) and connect the plug to a power outlet.
• Introduce the food cut into pieces inside the measuring glass (7) or another recipient.
• Introduce the blending shaft (2) into the container and press one of the two ON buttons
(first or second speed depending on the type of preparation) to start the appliance.
• Release the ON button to stop the appliance.
• After use, extract the blending shaft from the recipient and disconnect the plug from the
power outlet.
Attention!
• During use, always keep the power cord away from the blades.
• Do not leave the appliance unattended with the plug connected to the power outlet
• Never touch moving parts, especially the blades.
• Keep the appliance out of reach of children.
• Do not immerse the appliance in liquids for more than 2/3 of the length of the blending shaft.
• Do not operate the appliance on empty
• Do not use the appliance to blend food that is too hard such as coffee, ice, chocolate, etc.
• Do not let the mixer operate for more than 50 seconds consecutively. Wait 3 minutes
between each use to allow the motor to cool.
Fig.: 1 Fig.: 2