Publicidad
Idiomas disponibles
Idiomas disponibles
Switching the EUROLYSER smart laboratory photometer on and off
Start up the analyzer by connecting the power supply (AC adaptor plug) to the machine and plugging the
power cable into the wall socket.
It is not necessary to disconnect the power supply after you have finished your analyses. The machine is
equipped with an automatic standby function. When it remains idle in the main menu for 10 minutes with
no further operating commands, it switches into standby mode and dims the display lights.
The green LED light on the front remains illuminated:
To switch from the standby mode to the operational mode, just touch the display.
Use only your fingers to touch the
Y
display! Never use a hard or pointed
object.
Do not use liquid cleaners on the
display. Use a lint-free, slightly damp
cloth only.
SMART quick reference (ED 41208 / revD3 / 20.01.2011)
ENGLISCH
LED
Power Supply
5 / 10
Eurolyser Diagnostica GmbH
Publicidad
