Taking A Measurement; Memory Function - Braun ExactFit 3 Manual De Instrucciones

Setting month, date and time
a. Switch off the device for the date/time setting.
b. Press set button
"year" will blink on display. Press
1 step.
c. Press set button
"month" will blink on display, user can press adjust
adjust month by 1 step.
d. Press set button
"day" will blink on display, user can press adjust
adjust day by 1 step.
e. Press set button
"hour" will blink on display, user can press adjust
adjust hour by 1 step.
f. Press set button
"minute" will blink on display, user can press adjust
to adjust minute by 1 step.
g. Press set button
blinking stops.
Note: Holding the adjust button will scroll the value.

Taking a measurement

Wrap the cuff around the arm (see "applying the arm cuff" section above).
1. Sit upright on the chair to have a correct posture.
2. Press and release start button
3. Set user A/B switch (6) to A for user A or B for user B, LCD display will show user A or B symbol.
4. Press and release the start button
pressure will automatically pump up to certain pressure level and start measurement.
Do not move or talk in the midst of taking blood pressure measurement. During the measurement,
keep your legs uncrossed and feet flat on the floor.
5. After the air pressure has increased, the pulse is detected, the heart rate symbol
flashing.
6. LCD Display will show the results and AHA indicator arrow after measurement.
After using the device, turn it off by pressing the start button

Memory function

Your blood pressure monitor can store the latest 40 readings for each user.
Storing measurement data
After each blood pressure measurement, the systolic pressure, diastolic pressure, pulse rate and the
time & date of specific day will be automatically stored. Memory #01 is always the most recent one.
Once the memory is full, the oldest values will be overwritten.
M
Press memory button
measurement date/time, Irregular Heart Beat and AHA indicator will show on LCD. Press memory button
M
(2) again to show the previous data. Ensure that the correct user; A or B, is selected before use.
This device is not intended as a substitute for regular check-ups by your doctor, please continue to
visit your doctor on a regular basis for a professional blood pressure reading.
(4) to start the year setting, then the
(3) to adjust year by
(4) to start the month setting, then the
(4) to start the day setting, then the
(4) to start the hour setting, then the
(4) to start the minute setting, then the
(4) to end all the date/time setting, all
(1), date/time and current user will be displayed.
(1), all icons on display will be shown for 2 seconds. Air
(2) to review the stored data. The last memory data (sys/dia/pul) with
D M
D M
(3) to
D
(3) to
(3) to
(3)
D M
D M
A B
(1) or automatically after 1 minute.
A B
English
c.
A
P
d.
A
P
e.
A
M
P
f.
A
D M
P
g.
A
D M
P
A
P
A
P
will start
7