Sage FoodCycler SWR550 Guía Rápida página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 121
sides to eliminate any
moisture condensation
on the walls.
• Hot air is released
through the air vents
on the rear side of the
FoodCycler during
operation. Always keep
your hands and face at
a safe distance from the
hot air and from the air
vents.
• Never use the
FoodCycler without
the rear air outlet cover
installed as the inner
accessible surface of the
FoodCycler is very hot
during and sometimes
after operation.
• Never attempt to remove
the security seal sticker
or open the side cover
of the FoodCycler.
Warranty void if seal is
removed or damaged.
Misuse may cause
injury.
4
• Before starting to
operate the FoodCycler
each time, clean any dirt
or food residue on the
external surface of the
bucket and the surface
of the heating plate.
• The FoodCycler is
designed for processing
household FOOD
WASTE only. Do not add
non-food waste to the
FoodCycler.
• Do not fill the bucket
with hard food waste
such as hard bones or
other similar hard food
waste as it may damage
the bucket and the
FoodCycler.
• Do not over-fill the
bucket past the 'Fill line'
marked on the interior of
the bucket.
• Do not pack down food
waste to keep it beneath
the fill line once full.
Overloading the bucket
may cause a jam and
damage the motor and
FoodCycler.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido