Basic Parameters - General Measure M04 Manual Del Usuario

40046 00045
...... ......
40093 00092
40094 00093
40095 00094
40096 00095
40097 00096
40098 00097
40099 00098
40100 00099
(The function code of write single register is 0x06, for multi-register is 0x10, for read
40101 00100
40102 00101 Zero track range
40103 00102
40104 00103
40105 00104
40106 00105
40107 00106
40108 00107
- 38 -
7- Gain voltage is smaller
8- Indicator platform is unstable
9- Wrong weight value inputted
10- Low accuracy after calibration
11- Zero point over limit
12- Unstable when zero operation
13- Zero operation when running
14- Target is zero when running
15- Timeout when running
Remain
AD sample rate AD sample speed
4bit bytes, without symbol. If 10,000 turn deci-
Version
mal, then it is 01.00.00.
4bit bytes, without symbol. If decimal value is
Compile date
150611, then it is 11th, June, 2015.
4bit bytes, without symbol. If decimal value is
Compile time
150611, then it is 15:06:11.
The below is can read and write.
register is 0x03.)

Basic Parameters

Power-up zero Initial value: Off. Range: 0-1. (0: OFF; 1:
switch ON)
Initial value: 0. Range: 0-9. Unit: d.
Initial value: 2.0. Range: 0.1-99.9s. (Unit:
Zero track time
0.1s)
Stable range Initial value: 2. Unit: d
Stable timer Initial value: 0.3s. Range: 0.1-9.9s
Zero range Initial value: 50. Range: 1-99. Unit: %
Filter Initial value: 7. Range: 0-9.
Advance Filter
Initial value: 1. Range: 0-1 (0: OFF; 1: ON)
ON/OFF
M04 User Manual
M04-02110701