General Measure M04 Manual Del Usuario página 41

40109 00108
40110 00109
...... ......
40120 00119
40121 00120
40122 00121
Loadcell sensiti-
40123 00122
40124 00123
40125 00124
40126 00125
40127 00126
40128 00127
40129 00128
40130 00129
40131 00130
40132 00131
40133 00132
40134 00133
40135 00134
40136 00135
40137 00136
...... ......
40160 00159
M04-02110701
AD conversion Initial value: 2, 0: 120times/s, 1: 240times/s, 2:
rate 480times/s, 3: 960times/s.
Reserved
Calibration Parameters
Unit Initial value: 1, 0-g 1-kg 2-t 3:lb
Initial value: 3bits. 0-0bit; 1-1bit; 2-2bits; 3-
Decimal
3bits; 4-4bits.
Initial value: 2 mV/V; 1：1mV/V；2：2mV/V；
vity
3：3mV/V
Initial value: 0. 0:0.001；1:0.002；2:0.005；
Resolution
3:0.010；4:0.020；5:0.050
Initial value: 10,000. Range: Full scale ≤Deci-
Full scale
mal*100000 ≤999999.
Zero cali- When write in 1, the present weight will be zero,
bration only allowed to write when scale is stable.
with When read, it will return present millivolt value
weight at zero calibration.
Gain cali-
Input weight value (≤Full scale)
bration
When read, it will be the zero millivolt of
with
loadcell.
weight
Input zero millivolt.
Zero point
Range: when loadcell is 2Mv/v, it is 0.020-
calibration
8.000mV, bridge voltage is 5V.
without
When read, it will be the zero millivolt of
weight
loadcell.
Gain cali-
Range:
bration
volt≤10.000mV-zero millivolt. When write in,
without
indicator will store. When read, it will be zero
weight(mi-
millivolt of loadcell.
llivolt
Gain
Write in gain weight value(≤full scale). Must
weight ca-
write in gain millivolt first, which proceed gain
libration
calibration by both weight value and millivolt
without
value when write the register.
weight
Reserved
M04 User Manual
2mV/V (loadcell) ＜ milli-
- 39 -