Chauvet DJ SlimPAR Q12 BT Guía De Referencia Rápido página 3

EN
What is Included
• SlimPAR Q12 BT
• Power Cord
• Quick Reference Guide
To Begin
Unpack your SlimPAR Q12 BT and make sure you have received all parts in good condition. If the box or contents appear
damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of SlimPAR Q12 BT products that you can power link at each voltage, see the User Manual or
the specification sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting Clamp
(such as CLP-15 from Chauvet)
2
QUICK REFERENCE GUIDE
Safety Notes.
Mounting Bracket
Safety Cable
(such as CH-05 from
Chauvet)
SlimPAR Q12 BT QRG Rev. 4a