Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
WARNING!
Unsecured objects can become flying hazards and can cause
serious injury in an accident. If your vehicle is equipped with lower
anchors, Diono always recommends installation utilizing the ISOFIX
connectors with this booster seat.
To improve safety and performance, this booster seat is
equipped with a lower anchorage system that allows
secure attachment to a vehicle's lower anchor locations.
1.
Disengage ISOFIX connectors from storage slots
on bottom of seat. While depressing the ISOFIX
adjustment button, rotate ISOFIX connectors away
from the seat bottom and extend fully until you
hear a "click".
2.
Place the seat in the vehicle and align the ISOFIX
connectors to the vehicle's lower anchors.
3.
Attach both ISOFIX connectors to the vehicle
anchors. The ISOFIX lock button will change from
RED
GREEN
to
when the connectors "click"
locking to the vehicle anchors.
NOTE:
Even with ISOFIX connectors properly attached
and adjusted, child seat will still have movement
against the vehicle seat back and bottom.
16
1-855-463-4666
WARNING!
If the indicator is RED, pull on the tab to release the connector from the
anchor and re-attach until the lock button turns GREEN.
IMPORTANT:
1
seat belt.
IMPORTANT:
sure it is stable and does not rock from side to side.
ADJUSTING THE RECLINE ANGLE
2
This booster seat features a recline angle that can be
adjusted to match that of the vehicle seat:
1.
Push booster seat backrest backwards until you
hear a click. Backrest will now pivot freely and
does not need to click into another position.
3
Ensure the ISOFIX lock button is
Do not use ISOFIX if installation interferes with vehicle
When using booster seat in center seating position, make
diono.com
INSTALLATION
GREEN
on both connectors.
17
Publicidad
Capítulos
Tabla de contenido
