Main Unit (Front) - blackVault AR4131 Folleto De Instrucciones

3. Carefully remove the old vacuum tube by pulling it up until it is free
and clear of the pinholes in the top of the main unit.
4. Place the new vacuum tube in the main unit so that the connector
pins on the end of the tube are orientated to securely fit into the
corresponding connecting pinholes in the top of the main unit. DO
NOT force the tube into the housing!
5. Plug the power cord into the wall outlet and power on the main unit.
Note: Please contact us at www.araccessories.com if you have
any questions about replacing the vacuum tube.
0

Main Unit (Front)

Acrylic Housing
for Vacuum Tube