Setting Up The Speakers - blackVault AR4131 Folleto De Instrucciones

Setting Up the Speaker System and
Connecting an iPod or MP3 Player

Setting Up the Speakers

1. Place the speaker system's main unit and two speakers on a hard and
stable surface.
2. Find the two speaker cables that were included with the speaker
system. One end of each cable is split and has two wires; the other
end has a single connector. Take one of the audio cables and
connect the end that has the single connector to the input jack on
the back of left speaker. Attach the two wires on the other end of
the audio cable to the corresponding spring clips for the left speaker
on the back of the main unit [dark wire to positive (+), light wire to
negative (-)]. Repeat this process for the right speaker.
Speaker
Cable
Input
3. Plug the main unit's power cord into an appropriate wall outlet.
Place the main power switch on the back of the main unit in the
ON position.

Main Unit (Back)
Speaker
Cable
Spring Clips
AUX
Input
Main Power
Switch
Power Cord
Speaker
Cable
Input