Pioneer Elite PRO-1010HD Manual De Instrucciones página 16

Installation and Connections
Connection to AV components
Connection to AV component equipped with
component video jacks
Make component video connections for AV components
equipped with component video jacks.
When connecting to ANALOG RGB IN (INPUT1)
ANALOG RGB IN
AUDIO
INPUT1
INPUT1
D-Sub
R L
When using D-sub INPUT for INPUT1, select [D-sub] in
[INPUT1 SELECT] in the menu (page 23).
Note
You cannot simultaneously use the HDMI INPUT and this INPUT.
On-screen setup is necessary after connection.
Please see pages 23 to 25.
When connecting to ANALOG RGB (INPUT5)
ANALOG RGB
G(ON SYNC) B R HD (H/V SYNC) VD
Connect the Y signal to the G jack, the C
B jack, and the C /P signal to the R jack.
R R
On-screen setup is necessary after connection.
Please see pages 23 to 25.
INPUT5 jacks are all BNC jacks.
If necessary, use commercially available BNC/pin-plug
conversion adapters to make connections.
12
EN
HDMI
INPUT5
/P signal to the
B B
Note
This unit are designed to support component video signals with
standard, stable signal levels and sync signals. As a result, some
image disruption may be generated during use of various special
trick play functions on video components.
Connection of G ON SYNC analog RGB source
Make G ON SYNC connections for a component with
output that has the synchronization signal layered on top
of the green signal.
When connecting to ANALOG RGB IN (INPUT1)
ANALOG RGB IN
AUDIO
INPUT1
INPUT1
D-Sub
R L
When using D-sub INPUT for INPUT1, select [D-sub] in
[INPUT1 SELECT] in the menu (page 23).
Note
You cannot simultaneously use the HDMI INPUT and this INPUT.
On-screen setup is necessary after connection.
Please see pages 23 to 25.
When connecting to ANALOG RGB (INPUT5)
ANALOG RGB
G(ON SYNC) B R HD (H/V SYNC) VD
On-screen setup is necessary after connection.
Please see pages 23 to 25.
HDMI
INPUT5