General Specifications - Klein Tools CL3200 Manual De Instrucciones

ENGLISH
The Klein Tools CL3200 is an auto-ranging general-purpose clamp meter.
It measures AC / DC voltage, AC current, and resistance. It can also test
non-contact voltage and continuity.
• Operating Altitude:
•
Storage Altitude:
• 0% to 80% at 32°F to 95°F (0°C to 35°C)
Humidity:
0% to 70% at 32°F to 131°F (0°C to 55°C)
• Operating Temperature:
• Storage Temperature:
•
Accuracy Temperature:
•
Temperature Coefficient:
•
Dimensions:
• 7.9oz.
Weight:
• Calibration:
• Certifications:
•
Pollution Degree:
•
CAT Rating:
• ± (% of reading + # of least significant digits)
Accuracy:
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring
a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from
the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes
are connected.
• Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
CL3200
Instruction Manual

GENERAL SPECIFICATIONS

2000 meters
10000 meters
0°C / 32°F to 40°C / 104°F < 75% R.H.
-20°C / -4°F to 60°C / 140°F < 80% R.H.
18°C / 64°F to 28°C / 82°F
0.1*(specified accuracy) / °C
7.06" x 2.56" x 1.34"
Accurate for one year
UL & cUL standard UL3111-1 Listed
2
CAT IV 600V, CATIII 1000V
WARNINGS