Titan Controls EOS 1 Instrucciones De Uso

®
Eos 1
TM
Humidify / Dehumidify Controller
Easy Guide
VANCOUVER, W ASHINGTON U.S.A.
Instructions for Use
1. Mount Eos 1 near humidifier/dehumidifier, or
fan to be controlled, but away from water, mist,
vapor, etc.
2. Switch controller to Humidify or Dehumidify.
3. Set preferred humidity/dehumidity level on dial.
4. Plug equipment to be activated into female
side of piggyback cord set.
5. Turn "On" power to humidifier/dehumidifier/fan
to be controlled.
6. Plug male side of piggyback cord set into 120 volt,
15 amp outlet.
7. The Eos 1 will now activate and deactivate
equipment based on preferred setting.
Controller Specifications
Size: 8" 4" 2"
H x W x H
Weight: 2 lbs.
Voltage Input: 120 volts
Voltage Output: 120 volts
Maximum Amperage: 15 amps
Hertz: 60 Hz
Differential: 4%
Min/Max Humidity Control Level: 10% RH to 90% RH
(non-condensing)
Cord Set: 6 feet/14AWG/SWJT
o o
Storage Temperature: 0 to 135 F
o o
Operating Temperature: 40 to 110
®
www.titancontrols.net
For technical assistance call us at
1-888-80-Titan or 1-888-808-4826.
Controlling a Humidifier
Eos 1
Eos 1
Eos 1
Eos 1
Controlling a Dehumidifier
F
Eos 1
Humidifier
Humidifier
Humidifier
Controlling a Fan
Eos 1
Eos 1
Fan
Fan
Eos 1
Eos 1
Dehumidifier
Dehumidifier
Dehumidifier
Fan