SLIDE TAB800W Manual Del Usuario página 5

CHARGING THE BATTERY
The tablet has a built-in battery and the battery
comes partially charged. You must fully charge
the battery before using your device for the first
time. After the first charge, you can use the de-
vice while charging. Always charge the battery
using the provided 5V/2A power adapter.
Charging Via the Power Adapter
Connect the standard USB end of the USB
cable to the power adapter. Connect the
Micro-USB end of the USB cable to your tablet.
Then plug the power adapter into the main
socket.
Charging Via the USB Cable
Connect the standard USB end of the USB
cable to your PC. Then connect the Micro-USB
end of the USB cable to the
tablet.
An indicator light above the power button will
illuminate, indicating charging is in progress. If
the battery is completely discharged, you will
be unable to turn on the device, even with
the USB power adapter connected. Allow a
depleted battery to charge for a few minutes
before you try to turn on the device.
NOTE: You cannot sufficiently
charge the battery using the USB
cable and your PC due to incor-
rect current.
To check the battery status, tap
the battery icon at the bottom of
the screen.
port of the
Indicator Light
Power
Button