Machine Maintenance; Optional Squeegee Kit Maintenance; Pump Mainteinance; Storing Machine - Tennant V-WD-24P Manual Del Operador

tank.
7. Mount the head on top of tank and lock it
with latches.
normal.

MACHINE MAINTENANCE

To keep machine in good working condition,
simply perform the following maintenance
procedures.
when not in use and before servicing
machine.
All repairs must be performed by a
- Wipe machine housing with a cloth and
mild detergent.
- Inspect vacuum hose regularly for holes,
- Inspect power cords for damage. Coil the
extension cord neatly after each use.
- Drain and rinse tank.
-
clean and that is operating properly
OPTIONAL SQUEEGEE
MAINTENANCE
Replace blades when worn.

PUMP MAINTEINANCE

Soil can deposit and lead to
malfunctions. Pump clear water or
thoroughly rinse the pump after
every use.
DO NOT RUN THE PUMP DRY. The
pump depends on water for cooling and
lubrication. Operating the pump without
water may cause the motor to overheat or
cause damage to parts of the pump. It may
also shorten the life of your pump.

STORING MACHINE

Before storing the machine perform the
following instructions:
1.
and drain hose.
2. If machine is equipped with the optional
squeegee kit, remove squeegee assembly
from bracket and hang dry to prevent
corrosion.
3. Store machine in a dry area in the upright
position on a level surface.
Do not store outdoors and avoid
getting wet. Do not allow machine
to freeze.
Soil can deposit and lead to
malfunctions. Pump clear water or
thoroughly rinse the pump after
every use.
TENNANT V-WD-24P
EN
KIT
11