Motorola Solutions NNTN8234 Guia Del Usuario página 13

Table 4: Rear Pocket Battery/Charger Status
LED Color
Blinking green
Steady green
No LED Indication?
1. Make sure that the power supply cable is plugged
securely into the DC Connector and that the power supply
is plugged into an appropriate AC outlet.
a. Unplug the power supply from the wall. Inspect the
electrical contacts on the power supply plug.
b. Unplug the power supply from the charger. Inspect the
electrical contacts on the power supply cable and the
charger DC connector.
c. Firmly reattach the power supply to the charger.
d. Firmly replug the power supply into the appropriate AC
outlet.
2. Remove the Battery from the Charger Pocket:
a. Inspect the electrical contacts on the Battery.
b. Inspect the electrical contacts in the Charger Pocket.
c. Firmly reinsert the Battery into the Charger Pocket.
Battery/Charger Status
The Charger successfully detected a Battery in the
Pocket.
The Charger is charging the Battery. The Lithium
battery is more than 90% charged.
The Charger successfully detected a Battery in the
Pocket.
Lithium battery charging is more than 95%
complete.
11