Before carrying out any cle-
aning or maintaining opera-
tions, the appliance needs to
be removed from the electric
grid.
If the appliance is not provided
with a non-separable flexible
cable and plug, or with ano-
ther device ensuring discon-
nections from the grid, with an
opening distance between the
contacts of at least 3 mm, then
such disconnecting devices
must be supplied within the fi-
xed installation.
If the fixed appliance is endo
wed with a supply cord and a
plug, the appliance has to be
put in a place where the plug
can be reached easily.
Before carrying out the instal-
lation of the appliance, please
check that all components are
not damaged. In such a case,
make contact with your retailer
and do not proceed with the in-
stallation.
Should the product show any
anomaly, disconnect the ap-
pliance from the power supply.
When the range hood and ap-
pliances supplied with energy
other than electricity are simul-
taneously in operation, the
negative pressure in the room
must not exceed 4 Pa (4 x 10-5
bar).
15