Before Installing The Hob, Make Sure That - EAS ELECTRIC EMIH900-FX Manual

There are ventilation holes around outside of the hob. YOU MUST
ensure these holes are not blocked by the worktop when you put the hob
into position.
 Be aware that the glue that join the plastic or wooden
material to the furniture, has to resist to temperature
not below 150℃, to avoid the unstuck of the paneling.
 The rear wall, adjacent and surrounding surfaces must
therefore be able to withstand an temperature of 90℃.

9.2 Before installing the hob, make sure that

The work surface is square and level, and no structural members interfere
•
with space requirements.
The work surface is made of a heat-resistant and insulated material.
•
32
V.1