Panasonic NI-WT980 Instrucciones De Uso página 12

How to use the "Power Shot" feature
The "Power Shot" feature provides extra steam which goes deep into the
garment and is helpful for removing stubborn wrinkles.
If you have not used the "Power Shot" feature in a long time, it is necessary to
clean the inside of the iron before using this feature on any clothes to be
ironed. Simply test the "Power Shot" feature several times away from the ironing
board and clothes to be ironed. This will prevent brown spotting or water spotting
on the clothes.
1
1
Fill the Water Tank with tap water as described in "How to
fill the Water Tank".
2
2
Position the iron Heel rest position and
be sure the Power Switch is set to " ".
3
3
Plug the Power Plug into a household outlet.
4
4
Set the Power Switch to " " position.
The Thermostat Operating Indicator Light goes on.
5
5
Preheat the iron until the Thermostat Operating
Indicator Light goes off, which usually takes about
1 minute.
6
6
Simply pump the Power Shot Button when
steam is desired.
• Pump the Power Shot Button several times at the
beginning of each ironing session.
• Press the Power Shot Button in intervals of at least
2 seconds between use to prevent water spotting.
• Use a press cloth if necessary.
12