Panasonic NI-WT980 Instrucciones De Uso página 15

6. Hold the iron horizontally over the sink, press
and hold the Self-Cleaning Button and gently shake
the iron back and forth. Impurities and scale (if
any), together with steam and boiling water will be
flushed out.
Then, turn to METHOD(2).
►METHOD(2) Using the "Power Shot" feature
1. Repeat steps 1 to 4 as described in "METHOD (1)".
2. Hold the iron horizontally over the sink after the Thermostat Operating
Indicator Light has gone out.
3. Pump the Power Shot Button quickly (at least 3 times
per second) about 20-30 times.
While pumping, tilt the iron up and down slowly to
help clean the entire Water Tank and let the water drip
out of the Soleplate vents.
4. To prevent corrosion of the Soleplate vents, after the
Soleplate has cooled, set the Power Switch to " "
and preheat for about 5 minutes.
5. Unplug the Power Plug.
• Do not store the iron with water in the Water Tank.
6. Iron on a used cloth to remove any impurities on the Soleplate.
• Repeat METHOD (1) and METHOD (2) if the iron still contains a lot of
impurities.
• Use both methods once every two weeks. If the water in your area is very hard
(i.e. Steam holes on the Soleplate are easily blocked by impurities), both
methods should be used more frequently.
• Let the iron cool down on its Heel Rest and follow the instructions "After
each use".
►METHOD (3) Anti Calc System (Stay Clean Vents)
The built-in Anti Calc System in the Water Tank continuously reduces scale build
up in the vaporizing chamber of the iron.
This system makes it possible to use the steam function for a long period of
time and prevents steam vents from clogging.
15