Configuration - D-Link DIR-510L Guia De Instalacion

PRODUCT SETUP
ConneCting to the dir-510l
Step 1:
Turn on the DIR-510L by sliding the ON/OFF/Charge switch to ON.
Step 2:
On your PC or mobile device, connect to the DIR-510L's wireless network.
By default, the settings are:
- Wi-Fi Network Name (SSID): DIR510L-WXYZ (for 2.4 GHz) / DIR510L-WXYZ-5GHz (for 5 GHz)
(where WXYZ are the last 4 digits of the MAC address in uppercase letters)
- Password: (please refer to the included Wi-Fi configuration card)
Step 3:
Once connected, open a web browser on your mobile device or computer and type
http://dlinkrouter.local. or http://dlinkrouter in the address bar.
Step 4:
At the login page, enter the Admin Password. By default, it should be left blank. Click Log In.
If the password is not blank or you have forgotten the password, reset the router
by pressing the RESET button with a pin for 5 seconds or more, then release.

ConFigurAtion

After logging in, you will see a status page. If the Internet icon
If the Internet icon is grey and there is a
Using a Wired Ethernet Connection:
Enter the Username and Password given to you by your Internet Service Provider.
Using a 3G/4G USB Adapter:
If your SIM requires a PIN, enter it and click Save. If necessary, the wizard may ask you to
enter the APN, Dial-Up Number, Username, and Password details given to you by your service
provider.
Connecting to a Wi-Fi Hotspot:
Select an available hotspot and enter its password to connect.
dir-510l
is blue, the device is ready for use!
icon, click on the icon and follow the steps below:
3