Installation
Installation
Installation
Installation
Installation
W W W W W ar ar ar ar arning! Do not connect the appliance to the mains until the installation is fully
ning! Do not connect the appliance to the mains until the installation is fully
ning! Do not connect the appliance to the mains until the installation is fully
ning! Do not connect the appliance to the mains until the installation is fully
ning! Do not connect the appliance to the mains until the installation is fully
complete.
complete.
complete.
complete.
complete.
• • • • • Drawing a line on the wall with a pencil up to the ceiling, corresponding to the
centre line, will make the installation operations easier. Fig.1
• • • • • Apply the perforation diagram to the wall: the vertical centre line printed on the
perforation diagram should correspond to the centre line drawn on the wall. In
addition, the lower edge of the perforation diagram corresponds to the lower
edge of the hood. Fig.2
Fig.1
Fig.1
Fig.1
Fig.1
Fig.1
• • • • • Make holes as indicated on the template, insert the wall dowels and screw 2
screws into the upper holes, leaving a space of about 1 cm between the head of
the screw and the wall. Fig.3a-b
Note:
Note:
Note:
Note:
Note: Always make the holes indicated on the template. The upper 2 are for
hooking the hood up while the lower holes (generally 1 central or more lateral)
are for the definitive and safety fixing.
Fig.3a
Fig.3a
Fig.3a
Fig.3a
Fig.3a
Fig.2
Fig.2
Fig.2
Fig.2
Fig.3a-b
Fig.3a-b
Fig.3a-b
Fig.3a-b
electrolux
electrolux
electrolux installation
electrolux
electrolux
Fig.1
Fig.1
Fig.1
Fig.1
Fig.2
Fig.2
Fig.2
Fig.2
Fig.2
Ø 8
5x45
Ø 8
Ø 8
17
17
17
17
17
Fig.3b
Fig.3b
Fig.3b
Fig.3b
Fig.3b
GB