D-Fi RX™ 2.4 QRG
This Guide
Disclaimer
Safety Notes
What Is
Included
To Begin
Product
Description
Contact
About
The D-Fi RX™ 2.4 Quick Reference Guide (QRG) has the product's
connection information.
The information and specifications here are subject to change without
notice. CHAUVET® reserves to right to revise or reissue this QRG.
These Safety Notes include important information about mounting,
use, and maintenance.
• This product is not intended for permanent installation.
• Always connect this product to a grounded circuit to avoid the risk
of electrocution.
• Make sure the power cord is not crimped or damaged.
• Never disconnect this product from power by pulling on the cord.
• The voltage of the outlet you are connecting this product to must
be within the range stated on the decal or rear panel of the product.
• This product is for indoor use only! (IP20) To prevent risk of fire
or shock, do not expose this product to rain or moisture.
• Never connect this product to a dimmer.
• The maximum ambient temperature is 104° F (40° C). Do not
operate this product at higher temperatures.
• In the event of a serious operating problem, stop using
immediately.
• Never try to repair this product. Repairs performed by
unauthorized technicians can lead to damage or malfunction.
Contact the nearest authorized technical assistance center.
• D-Fi RX™ 2.4
• Power Supply
Unpack your D-Fi RX™ 2.4 and make sure you have received all
parts in good condition. If the box or contents appear damaged,
notify the carrier immediately, not CHAUVET®.
The D-Fi RX™ 2.4 is a wireless transmitter with a range of up to
200 m (656 ft). The transmitter wirelessly pairs multiple D-Fi™ 2.4
Ghz-compatible products with one button and supports one DMX-
512 universe.
Outside the U.S., United Kingdom, or Ireland, contact your
distributor to request support or return a product. Visit
www.chauvetlighting.com
• Warranty Card
• Quick Reference Guide
for contact information.
2
EN