Chauvet D-Fi 2.4 RX Guía De Referencia Rápida página 3

EN
Operation
AC Power
Product Overview
1. Clear the previous frequency setting from all CHAVUET® D-
Fi™ 2.4 GHz receivers.
2. On the D-Fi RX™ 2.4, press the AUTO button for 15 seconds
or until transmiting product(s)' signal LED blinks rapidly.
Note: Receiver(s) should be 3~10 ft (1~3 m) away from the
transmitter during sync.
This product has an external auto-ranging power supply that can
work with an input voltage of 100~240VAC, 50/60Hz.
Power Input
Signal LED
Antenna
Mounting Hole
3
D-Fi RX™ 2.4 QRG
DMX Input
AUTO Button