Saivod TMS307 Instrucciones De Montaje página 29

THE OPERATING COMMON KNOWLEDGE
 Before operating it each time, you must make the electric water heater fully filled first. After that,
it can permit you to put through the power source.
 When no tap water provides, you mustn't use the water in the tank of electric water heater.
 For the cold and frozen regions in winter, when not using it for a longer period of time, you should
make the water in the tank of electric water heater emptily occupy. The emptiness-making methods
can be seen the "Security Characteristics" in this instructions brochure.
 When the electric water-heater is in normal work, the leakage pressed mouth of the security valve
may exist the water drops to drip out. This belongs to the normal conditions. Take care not to block
this leakage pressed exit. You can use the plastic pipes to lead flowing. However, you must keep it
through with atmosphere.
 The power-source outlet must have the reliable ground connections for the use.
 Double-level Temperature-limiting protection Switch: This electric water heater processes one
required artifice position-resetting double-level temperature-limiting protection switch. Enabling
to automatically cut off the power sources when the electric water heater is over-heat by the
accidents or the water temperature is hype-high. Guaranteeing the two poles are cut off. That
ensures to be safe.
 The Position-resetting Methods of the Double-Position Temperature-limiting Device:
1) Pull down the power-source plug
2) Make the plastic lid on the bottom( right side of horizontal style) the electric water-heater to be
opened with tools.
3) Press down the white-color position resetting button on the two positional temperature limiter.
4) Close the plastic cover.
5) Slightly reduce the temperature-setting value.
6) Reinsert the plug of the power source and put through the power source. If the above-mentioned
operations can't still let the whole unit put through the power and work normally, which indicates
the water temperature in the tank is still over-high. Please open the water exiting valve and pour
out the heat water for several minutes, then repeat the above mentioned procedures after waiting
the water temperature reduces.
THE PRODUCT'S FEATURES
 Unique Profile: New tide personalized design, leading the market's new tides.
 The sapphire golden silicon tank: Rust-proof, Erosion-proof, Anti-leakage, More advanced with
high efficiencies & longer longevity.
 High efficiencies energy saving & temperature maintaining heat isolation layer: Adopting the
thickended non-fluorine amine-gathering resin whole body's bubble-making heater isolation
layers, good temperature-keeping performance. Reducing the heat loss with the maximum
degrees. Under the electricity cutting off and the temperature keeping conditions, still exiting the
hot water for provisions within 48 hours.
 Rated power heating: 1500W.
 Adjust the power according to your need, "OFF" for 0W, "1" for 500W, "2" for 1000W, "3" for 1500W.
 The water pressure: normal use in the range of 0.02-0.75MPa.
water heater.indd 29
GB
29
3/1/2017 4:42:43 PM