Saivod TMS307 Instrucciones De Montaje página 33

OPERATING INSTRUCTIONS
 Water Entering: After fixing all the pipes, then make the cold and heat
water-blending valve rotate to the high temperature sector according to
the clockwise direction. And reopen the cold water pipe's water entering
valve. At this time, the electric water heater's tank will start to enter the
water. Waiting that the shower sector of the water exiting mouth is in normal
condition, which indicates that the tank has fully filled with water.
Cautions: During the electric water heater is in the normal operating procedures,
the water-entering valve of the cold water pipe's mouth-entering sector must
be in the open condition from the beginning to the end .At this time, the water-
entering valve can still make the functions of regulating the water-existing mouth
section's flowing strength and weakness. However, the cold and hot mixed water
valve can only regulate the water temperatures and make the function of closing the water existing.
 Putting through the power: After confirming the tank to be fully filled the water, you can make the
power source's plug insert into the outlet and put through the power sources.
 Hot water operations: After the electric water heater normally works and heats for a long period
of time, you can use the hot water in the tank, you need to make the cold and hot mixed valve
water heater.indd 33
GB
33
3/1/2017 4:42:43 PM