Use the throttle controller to change the drone's flight height
(controller forward/back: up/down) and rotation (controller left/
right: yaw). Push the controller forward slowly to make the drone
lift off. Use the right-hand controller to move it forward/back
(pitch) and sideways (roll). The drone's red LEDs will always point
Note: Allow the drone to lift off slowly; you only need to make
gentle controller movements to control the drone. Be aware that
the drone can only be controlled reliably up to a distance/height of
around 10-15 metres. Keep the drone away from people, animals
and delicate objects, and observe the accompanying safety
To flip the drone, fly the drone to a height of around 2-3 metres.
Now press the right-hand shoulder button; you will hear a
repeating beep. Move the right-hand controller in any direction,
To adjust the drone's maximum speed, land it and then press the
left-hand shoulder button. A beep will indicate the setting:
one beep = slowest speed; two beeps = medium speed; three
Headless mode: this mode makes the drone easier to control.
To activate Headless mode, press the right-hand button beneath
the right-hand controller; the drone's LEDs will start to flash. To
deactivate Headless mode and return to standard control mode,
and the drone will flip in that direction.
beeps = fastest speed.
Follow the guidance given in step 4.
press the same button again.
6.
forwards.
instructions.
7.
8.
9.