Kit Assembly - Metra 95-7319 Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the corresponding a/c control
brackets to the factory a/c control using
the factory hardware. (Figure A)
Note: The radio housing must be
installed first before the a/c control.
2. Secure the radio brackets to the radio
with screws supplied with the radio.
(Figure B)
3. Slide the radio into the radio opening of
the sub-dash.
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or AXXESS. Test the radio for proper
operation.
5. Secure the radio housing onto the
completed assembly using the factory
screws. (Figure C)
6. Reassemble the dash in reverse order of
disassembly.

KIT ASSEMBLY

(Figure A) (Figure B) (Figure C)
REV. 10/26/2017 INST95-7319
3