Storing The Battery; Handling And Transport; Assistance And Repairs; Warranty - ST BL 20 Li S Manual Del Usuario

2. Allow the engine to cool before
storing in an enclosed space.
3. Clean (para. 7.3).
4. Make sure there are no loose or
damaged components. If necessary,
replace the damaged components and
tighten any screws and loose bolts or
contact an authorised service dealer.
5. Store the machine:
– in a dry place
– protected from inclement weather
– in a place where children cannot get to it
– making sure that keys or tools used
for maintenance are removed.

8.2 STORING THE BATTERY

If the battery is not chargerd for a long period
of time, it must be kept in a cool, shaded
place without humidity, with environmental
temperature between 0~45°C.
NOTE If unused for any length of
time, recharge the battery every two
months to prolong its working life.

9. HANDLING AND TRANSPORT

Whenever the machine is to be
handled or transported you must:
– Stop the machine (para. 6.5);
– Make sure that all moving parts
have come to a complete stop;
– Remove the battery from its housing
and recharge it (para. 7.2.2);
– Only hold the machine using the
handgrips and position the pipes so
that they do not cause obstruction.
– Make sure that machine movements
do not cause damage or injuries.
When transporting the machine
on a vehicle, always:
– remove the tubes;
– position it so that it does not
cause a hazard to anyone.

10. ASSISTANCE AND REPAIRS

This manual provides all the necessary
information to run the machine and for
correct basic maintenance operations
which can be performed by the user. Any
regulations and maintenance operations
not described herein must be carried out by
your Dealer or Authorised Service Dealer.
Any operations performed by unauthorised
dealers or by unqualified persons will totally
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.
• Non-original parts and attachments are
not approved; use of non-original spare
parts and attachments will jeopardise
the safety of the machine and relieve the
Manufacturer from all obligations or liabilities.
• Original spare parts are supplied
by authorised Dealers and by
Authorised Service Dealers.

11. WARRANTY

The warranty conditions are intended for
consumers only, i.e. non-professional operators.
The warranty covers all material quality
and manufacturing defects recognised
during the warranty period by your
Dealer or Authorised Service Dealer.
The warranty is restricted to the repair or
replacement of components recognised as faulty.
The warranty only applies to machines
subjected to regular maintenance.
The warranty does not cover
damages resulting from:
• Failure to become familiar with the
documentation accompanying the
machine (Instruction manuals).
• Professional use.
• Carelessness, negligence.
• External causes (lightning, impact, presence of
foreign bodies inside the machine) or incidents.
• Incorrect use or assembly are
prohibited by the manufacturer.
• Poor maintenance.
• Modification to the machine.
• Use of non-genuine spare
parts (adaptable parts).
• Use of accessories not supplied or
approved by the manufacturer.
The warranty does not cover:
• The maintenance operations (described
in the instruction manual).
• Normal wear and tear of consumables.
• Normal wear and tear.
• Deterioration in the appearance
of the machine due to use.
• Any ancillary expenses related to the
enforcement of the warranty, such as
costs incurred to travel to the user's
location, transfer of the machine to the
Dealer, rental of replacement equipment
or calling of independent enterprises
to perform maintenance work.
The user is protected by his or her own
national legislation. The user's rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
EN - 9