Operating Instructions For The Lemken Plough; Changing Adjustments; Display - LEMKEN -EPS Instrucciones De Servicio

5 OPERATING INSTRUCTIONS FOR THE LEMKEN PLOUGH

All adjustment instructions shown in the instruction book of the LEMKEN plough
referring to the turning procedure, the working width adjustment per body, the
front furrow width adjustment and the pitch adjustment must be adhered to, when
the plough is equipped with electronic plough control EPS.
Instead of a spool valve the corresponding function button on the operator termi-
nal must be pressed, only.

6 CHANGING ADJUSTMENTS

All adjustments can be changed during operation.
The electronic plough control follows always the latest entered adjustments. After
switching off the electronic plough control each not stored adjustment gets lost.

7 DISPLAY

On the display all current adjustment data will be indicated continuously, and that:
the pitch adjustment in degree,
the working width adjustment per body in cm and
the front furrow width in percent.
The indication of the working depth is not activated.
• Please familiarise yourself with the LEMKEN implement as well as
with its plough control and their operations before putting the im-
plement to work. Therefore use this instruction book as well as the
instruction book for the plough with the „General Health- and Safety
precautions"!
• Before turning the plough, the implement must always be lifted completely!
• For transport position the Uni-wheel must be converted as described in the in-
struction book for the plough!
• In transport position the plough must be secured by means of the lock pin at
the headstock!
• When the plough shall be turned again, the lock pin must be unlocked again!
15