Cleaning And Maintenance - PURIFY F Serie Manual De Usuario

CLEANING AND MAINTENANCE

PRE FILTER (every 2 weeks)
Clean the surface of the filter with a vacuum cleaner or wash with water. Allow to dry thoroughly.
CELLULAR ACTIVATED CARBON / COLD CATALYST FILTER (every 8 weeks)
Clean the dust from the front of the filter with a vacuum cleaner. Place the filter in a ventilated area, this
will allow harmful gasses and germs to dissipate. Do not place under too much sun exposure. The filter is
delicate. Do not press too hard on the filter while vacuuming. Do not use water to clean this filter.
ANTIBACTERIAL FILTER / HEPA (every 8 weeks)
Place the filter in a ventilated area, this will allow harmful gasses and germs to dissipate. Do not place
under too much sun exposure. Do not use water to clean this filter.
ANION PRODUCER
When you hear the machine produce a creaking sound, use a paintbrush as a cleaning tool. Insert the
brush from the ventilation window above the anion emission head. Regularly clean the dust all around the
emission head.
Brush
PARTICULATE SENSOR (every 8 weeks)
• Wipe the lens with a dry cotton swab periodically to remove any dirt. (Moisture or tobacco smoke
residue may cause it to no longer work properly). First remove the particulate sensor cover, use a dry
cotton swab to wipe the lens.
• Do not insert the cotton swab into any area other than the lens.
• Be sure to unplug the power cord.
• If you are unable to see clearly, please use a light.
Ion
producer
Cotton swab
ITA EN
06
Brush
Cotton swab