Symbols On The Unit - Ideal Vol-Con XL Manual De Instrucciones

CAUTION
To protect yourself, think "Safety First":
• Comply with local and national safety
codes.
• Use appropriate personal protective
equipment such as face shields,
insulating gloves, insulating boots,
and/or insulating mats.
• Before each use:
- Perform a continuity test by touching
the test leads together to verify the
functionality of the battery and test
leads.
- Use the 3 Point Safety Method. (1)
Verify meter operation by measuring
a known voltage. (2) Apply meter to
circuit under test. (3) Return to the
known live voltage again to ensure
proper operation.
• Always work with a partner.
Features:
• Vibration Mode w/indicator movement
• Audible and LED Indication of Voltage
- 3 -

Symbols on the Unit

Risk of Danger. Important
Information. See Manual.
Hazardous voltage.
Application around and
~
removal from Hazardous Live
conductors is permitted.
AC (Alternating Current)
DC (Direct Current)
Earth Ground
Measurement Category II
applies to test and measuring
circuits connected directly
CAT II to utilization points (socket
outlets and similar points)
of the low-voltage MAINS
installation
Measurement Category III
applies to measuring circuits
CAT III connected to the distribution
part of the building's low-
voltage MAINS installation
Measurement Category IV
applies to test and measuring
CAT IV circuits connected at the
source of the building's low-
voltage MAINS installation
- 4 -