Technical Specifications - Xtech FIERCE Manual Del Usuario

7. When pairing is successful, another tone will be heard through the speaker
and the word "bLUE" will stop blinking (solid state). If after 60 seconds the
pairing process fails, please repeat steps 1 through 6 described above.
8. You can now start streaming audio through the speaker wirelessly from
your favorite Bluetooth®- enabled devices.
9. The speaker will re-pair automatically with memorized devices after being
turn off and on again.

Technical specifications

Device
Type
Maximum power output (RMS)
DC input
Speaker
Driver unit
Frequency
Impedance
Sensitivity
Signal to noise ratio
Microphone
Directivity
Frequency
Impedance
Sensitivity
Connectivity
Connection type
Memory card slot
Wireless RF frequency
Wireless range
Battery
Type
Charging time
Runtime
Charging method
Additional information
LED lighting effects
Dimensions (LxWxH)
Weight
Color
Cable length
Warranty
*Playback time may vary depending on each individual's playlist, usage and settings
6.5in party loudspeaker system
Bluetooth compatible
®
50W
5V/1A
Satellite speakers: 2x6.5in
20Hz-100Hz
6.5in@3Ω
83dB±3db
≥70dB
Omnidirectional
50HZ-13KHZ±3db
600Ω
12db(-95dbm)
USB, SD™ (TF), Bluetooth (wireless), Aux (wired)
®
and one ¼in jack for microphone
USB, MicroSD™ (TF card)
2.4GHz-2.480GHz
＞10m
3.7V 2000mAh, lithium ion cell
5 hours
Up to 8 hours at 50% capacity*
Micro USB 5V/1A
Yes
9x8.2x20.4in
6lb
Black
4ft
1 year
Precautions
• Do NOT use this unit for anything other than its intended use.
• Do NOT expose the speaker to excessive heat or to direct sunlight for
long periods of time.
• Do NOT expose the speaker to rain or water, and avoid environments
with high humidity or dust.
• Do NOT disassemble, repair or modify the speaker yourself.
• Do NOT use cleaning products that contain benzene, solvents or alcohol.
• Do NOT use near a microwave oven or wireless LAN products.
• Do NOT place containers with liquid on top or near the speaker.
• Do NOT place objects which are sources of heat on the speaker cabinet
such as lighting equipment or smoke machines
• Do NOT stack the speaker cabinet in a manner that could cause injury
should a cabinet become dislodged.
FCC statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.