Monitor Audio PL IN-WALL II Guia De Instalacion página 7

Specifications
System Configuration
Frequency Response (-6db)
Sensitivity (1W@1M)
Impedance
Maximum S.P.L (per pair)
Power Handling (R.M.S)
Recommended amplifier
requirements
Bass Alignment
Mid/ H.F Crossover
Frequency
Bass/Midrange Crossover
Frequency
Drive Unit Complement
Fixings
Cut Out Dimensions
(H x W x D)
Overall Dimensions
(H x W x D)
External Dimensions
(inc grille) (H x W x D)
Weight (each)
Guarantee
Both the craftsmanship and the performance of this product is guaranteed against manufacturing defects for a period of five years for speakers from the
date of purchase (see conditions in the Important Safety Instructions booklet), provided that the product was supplied by an authorised Monitor Audio
retailer under the consumer sale agreement.
To verify your manufacturer's warranty, please visit the online registration form at: www.monitoraudio.com
4 Ohms Nominal (3.7 Ohms Minimum @ 2.8kHz)
2 x 6.5" long-throw RDT®II bass drivers
10 x Tri-grip
Monitor Audio reserves the right to alter specifications without notice.
monitoraudio.com
PL IN-WALL II
4 driver, 2-way
52Hz - 100kHz
90 dB
117 dBA
200 W
100-200 W
Sealed Cabinet
4.1 kHz 3rd Order (18dB/Octave)
700 Hz 2nd Order (12dB/Octave)
1 x 4" RDT®II mid-range driver
1 x MPD® high frequency transducer
Dog leg type fixing system
TM
1175 x 300 x 97.5mm
(46 x 11 x 3 inch)
1/4 13/16 13/16
1205 x 330 x 102 mm
(47 x 13 x 4 inch)
7/16
1205 x 330 x 116 mm
(47 x 13 x 4 inch)
7/16 9/16
27kg (59.4 lb)
5