SOLIS Barista Perfecta Plus Manual Del Usuario página 26

Lower the frothing nozzle of the steam/hot water
EN
●
wand a few millimetres into the milk, then turn
the steam/hot water control all the way up. Steam
escapes and the steam button flashes during the
steam function.
When the milk is sufficiently steamed or as soon
●
as your hand can not touch the milk jug for longer
than 3 seconds (ideal temperature of approx.
149 °F / 65 °C is reached), turn off the control. Only
then remove the milk jug. The steam button con-
stantly lights up white again.
Wipe the steam/hot water wand clean with a damp cloth. Lower the steam/hot
●
water wand with the thermo-insulated rubber handle down to the holes in the
drip tray, turn the steam/hot water control back to the highest steam position
and allow some steam to escape into the drip tray to flush the milk residue out
of the steam/hot water wand. Turn off the control.
Pour the steamed milk directly onto the espresso.
●
CAUTION: Never touch the hot surfaces of the espresso machine especially the one
of the steam / hot water wand during and after the steam function. You could scald
yourself! Never point the steam / hot water wand towards persons, animals or
steam and moisture sensitive furniture! The escaping steam is very hot and could
cause scaldings!
NOTES:
A steam release of not more than 60 seconds is recommended.
●
As long as the steam button is constantly lit, you can activate the steam func-
●
tion at any time. After approx. 40 seconds, the machine exits the steam mode
and slowly cools down to again reach the temperature for dispensing coffee.
This might take a few minutes. During this time, the two coffee buttons flash.
To speed up the cooling process, press one of the two coffee buttons. The
cooling-rinsing cycle is performed, steam escapes into the drip tray and the two
coffee buttons flash white. As soon as the two coffee buttons constantly light up
white, coffee can again be prepared. If you want to return to the steam function,
press the steam button and wait a few seconds until the steam button constantly
lights up white.
In general:
If the steam button flashes, the appliance is heating up for the steam function.
If the steam button is constantly lit up white, the steam function can be activated by
turning the steam/hot water control.
If the two coffee buttons flash, the appliance cools down again for coffee dispensing
or a cooling-rinsing cycle is performed.
If the two coffee buttons are constantly lit up white, coffee can be prepared resp.
the machine is in operation mode.
26